They are used, as their name implies, for pruning trees.
Felling requires precision and great care to ensure the safety of people around, the surrounding area and preservation of the wood.
Nov 27, Tree felling saw cuts straight back, approximately one guide bar width. Swing the saw around the trunk but avoid sawing into the hinge.
Do not forget to paus to insert the wedge or breaking bar. Continue to swing the saw, completing the felling cut and creating a hinge with a uniform thickness and even cut (very important!).Estimated Reading Time: 7 mins. Jan 10, One creates a bird’s-mouth cut or a face cut, as it’s commonly called – a 45 degree wedge-shaped cut on the side of the tree facing the direction you want it to fall. Then use the saw to make a ‘felling’ cut from the other side of the tree towards the wedge cut, leaving a hinge of timber to control the direction of fall.
Start a bore cut at the normal level for a back cut, again using the lower quadrant of the bar.
Furthermore, the hinge stays in position until the tree falls.
Bore straight in, leaving enough hinge wood for the size of the tree. Walk the saw back, cutting approximately half the tree and leaving sufficient holding wood in back. Repeat the procedure on the opposite side.
Use a release cut from the back side. Felling The Tree (Summarize) Mark Cut Locations With Surveyors' Paint (Visually Plan Felling Approach) Face The Tree (Two Planar Cuts) –Select A Face Cut Type: Open, Conventional, Humboldt –Always Located On The Desired Felling Direction Side Of The Tree –Check Face Location With A Horizontal Line Centered And.