Tire Width Tire Width.
Frequent inspection is the first step in avoiding excessive wear to this area.
Jul 12, 5, Posts. #7 Jul 12, I just looked at a '93 diagram, and B is the bushing for the shaft that goes behind the heel/toe shifter. H5 may be a color or material code. While I had my shaft out, I drilled & tapped the case for a zerk fitting. Now it gets bushremover.barted Reading Time: 3 mins.
Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove the inner primary; Tool also will install new bushings to the correct location; Bushings can be swapped out in approximately 20 minutes using this tool - a huge time saver; Made in the U.S.A.
Included Items: (1) Shifter shaft bushing remover (1) Shifter shaft bushing installer nut (1) Shifter shaft bushing 5/5(18). Feb 13, Just found a forum post that describes replacing those bushings without removing the primary. Involved use of a Blind hole puller to remove the outboard bushing and a appropriately sized socket to drive out the inboard one. Then installing new bushings using a appropriate threaded rod and nuts. Uncharted territory is about to be bushremover.barted Reading Time: 9 mins.
Sep 02, A proper size socket can be used too drive the inner one out. A long bolt with large washer can be used to pull them back in. If they are worn really bad, you may have to use a hacksaw blade to cut a slice in one side of the bushing to get it out. Bodeen, Sep 2, #8. Harley Touring Shifter Components. Bring your unique touring bike to life and ensure smooth shifting in the process with the best Harley-Davidson shifter parts at the world's largest aftermarket motorcycle parts and accessories store, J&P Cycles.
We stock custom Harley touring shifter pegs destined to stand out from the crowd, and each part is. Drain Primary Fluid, remove outter primary cover, Remove compensating Nut its the one on the front, use a snap ring plyer on the clutch, remove the clutch adjuster nut rod plate. will come out in one piece, Remove the Chutch Hub Nut it turns opposit (in other words tightening is loosening it) remove bolt on the chain tensioner, whole system will now pull out.
Aug 18, Stripped shift arms and Harley shifter shaft are a common problem for almost every model Harley Davidson. Your shift assembly will be actuated thousands of times, just riding over the course of one weekend.
Eventually the spline of the shift arm and the shift. These tool set is time saver to remove worn shift shaft bushing with no the inner primary removing need, swapped out the bushing in approximately 20 minutes.(Also help install the new bushing) Orange Cycle Parts Chrome Inner Shift Rod Lever for Harley Tour Glide FLT/Electra Glide FLHT and FL Trikes Replaces Harley #B.